I decided attempt to make my own intake. There is a little valve right after the throttle body. Do I need to make a hole in the intake for this or can I plug it.
Car is an 07 Grand Prix GT.
Thanks for any help
Dustin
|
|
08-15-2009
I decided attempt to make my own intake. There is a little valve right after the throttle body. Do I need to make a hole in the intake for this or can I plug it.
Car is an 07 Grand Prix GT.
Thanks for any help
Dustin
08-16-2009
...valve after the throttle body? your MAF? the IAT sensor?
08-16-2009
hell....all the valves r right atfter the throttle body lol take a pic and post it
08-16-2009
Valve right after throttle body.....on a GTP thats the EGR butterfly right?
08-16-2009
Heres a pic. I can easily tap into the intake or plug it. So either solution I get is fine with me. Thanks for the quick replies.
08-16-2009
...is that? where does it go? what is it connected to?
08-17-2009
Thats the vacuum for the L32 m8
08-17-2009
well, i realize its a vacuum line, but which one? im not used to the l32 throttle body setup.
08-17-2009
Dunno but its not a recirc valve and prolly shouldnt be blocked off.
08-17-2009
I ended up tapping it back into the intake. It runs fine with it out and with it back in. It was under vacuum at idle so I figured it was best put back like the factory had it. Thanks for the replys
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
