Yes, all you need to do is mill the guides. A port and polish is highly recommended, but sounds like you are getting that done.
The xpz requires different pushrod lengths. Stock is fine strenth-wise, but they are not the correct lenghts.
Wbody Stage 1
3800 Stage one
zzp VS
zzp XP
|
|
10-27-2015
Yes, all you need to do is mill the guides. A port and polish is highly recommended, but sounds like you are getting that done.
The xpz requires different pushrod lengths. Stock is fine strenth-wise, but they are not the correct lenghts.
10-27-2015
What about the s3? same lengths?
Its starting to sound like I should wait on the cam until I have a good chunk of cash to throw at it, and just go e85 for now.
10-27-2015
When you buy the xpz new or used it usually comes with the rods
my s3 cam used 1 length
10-27-2015
*insert under analyzed post here about over analyzing cam choice*
10-27-2015
Dude. I looked at s1x cam with a more lift using 1.8 or 1.9 rockers but same duration. Then I looked at the xpz vs s3. I considered a custom grind but I could what I found was if it could have been done it would have already. Soo many numbers being thrown around.
Searched for days on actual s3 and xpz 1/4 miles and dyno charts.
10-28-2015
It was 3 swaps bish.... And im still mad we did not race when you were here in DC when you had the s1x ...my xp on 2.8 gen v stg 3 p&p heads on e85 might have surprised your corn built motor heheOriginally Posted by MyNameBlows
Sent from my LG-D851 using Tapatalk
10-28-2015
I think Im going to e85 first, if im going to bother with a cam I might as well go for the throat.
I can e85 the thing for 500, a "Proper" cam install with a big boy is going to cost me closer to a thousand it looks like.
cam, 330, lifters 100(my LS7 have metal in them) Rings 120, retainers 40, double roller and install parts 150, gaskets 100, misc head work ~50-200, tuner 260 depending what I get done.
e85, Injectors 250, tuner 260
( I could just throw 42# and go too)
I appreciate all the info!
10-28-2015
Wa wa wa waaaa
10-28-2015
did you mean to say "springs" when you said rings?
10-28-2015
Yes
10-28-2015
Wa wa wa waaaa
I realized I need twice the budget I have to Do it right.
10-28-2015
Budgets. Sure as hell didn't buy mine in one shot. Buy used , shop around, collect and be patient...
look for someone demodding and grab some 42s and see if you like the corn method
11-06-2015
NIC Cam, they have minimal power, everyone hates them for some odd reason, but they sound tits, and I like tits.
11-06-2015
Have you heard mine? Me likes
11-06-2015
No hahha have you heard mine? Wish I had a youtube link, hell I might just upload the vid right now!
11-06-2015
Do it !
i think I have both the s1x and the s3
11-06-2015
http://youtu.be/r5Wq3JuL4_8
Sent from my iPhone using Tapatalk
11-07-2015
I miss my thrasher cam.
It shook my fillings out.
11-07-2015
Cheater! You got the cut out open. Well the I'll have to show you mine with open down pipe
****er didn't wanna run at the end lol
http://youtu.be/Yk1G1sTOIm0
| « Previous Thread | Next Thread » |
| Bookmarks |
Bookmarks |
