HV3 is more reliable though.
Honestly, cam would be better for powa's.
|
|
04-10-2012
HV3 is more reliable though.
Honestly, cam would be better for powa's.
04-10-2012
6000 RPM shift points, L76 springs, headers, WB, tuner, 100 shot.
100 shot > cam.
Although, I want to do both...so...I'm a hypocrite.
04-10-2012
I'll have all of that minus the shot.
BUT theres supposed to be a cam in the mail.
04-10-2012
So...
heads/cam/nitrous = 3.4"/valvetrain setup?
The lulz...especially if I can do it on the cheap.
You have a cam in the mail, I'm snagging a NEX kit from my Mustang buddy who sold his car..this is going to be funny.
04-10-2012
Can the HV3 insert alone have noticable gains? Well with the Intake i have here, but i do know a tune will help all those mods out.
04-10-2012
Not really.
Stock valvetrain doesnt flow well up there and the car shifts too soon for it to be worth it.
04-11-2012
Thats why I waited for someone to buy it for me lols, gotta love family!
:4'' HAI\L67 HVTB\HV3\ER Rockers\WP underdrive pulley\Headers\cat delete\91 octane overkill incar tune.3.69 gears, Trans go shift kit.
04-11-2012
Get flow mods.
Then get more intake based mods.
Get a tune.
Enjoy making maybe 200 WHP and still running 15's.
04-11-2012
me and him been chatting in pm's he might go turbo one day soo these are good mods to support it. thats what im doing, might see a turbo trans setup getting ready for next spring/summer for me's
:4'' HAI\L67 HVTB\HV3\ER Rockers\WP underdrive pulley\Headers\cat delete\91 octane overkill incar tune.3.69 gears, Trans go shift kit.
04-11-2012
Ya im thinking about turbo, but at the same time the Tranny will be done if i do that.
04-21-2012
Hey any one know what i can use to replace that accordion thingy, i cant find anything with a hole to put that little vacuum hose in. We dont have any drills to make a hole but what do you guys think we can or should get? We tried to look for something at the Home Depot. but nothing there that can be clamped to the TB and the MAF. Also the intake is too long do we cant use anything thats really big.
04-21-2012
3.5" 3-PLY 45 DEGREE ELBOW TURBO/INTAKE PIPING SILICONE COUPLER HOSE/PIPE RED | eBay <--- pretty much what i bought. which i have a pic of on page 3 of this thread lol
you could use a knife and twist slowly too make a hole, thats what i did when i didnt have a drill.
:4'' HAI\L67 HVTB\HV3\ER Rockers\WP underdrive pulley\Headers\cat delete\91 octane overkill incar tune.3.69 gears, Trans go shift kit.
04-28-2012
Forgot to mention thanks for the link but its too expensive compared to the 2$ PCV pipe we just brought from Home Dept. and clamped that in place very nicely. Question though, what is that little Vac for that we had to make a hole and plug in for? So here it is finished and final, only time we will takes this off is to clean the TB in summer. i should really make a ride thread.
So ya the hole on the pipe was a little to big so we put tape on the edges of the vac and plugged it in and it seems to be air tight, so is ok and what is it for?
04-28-2012
it leaks doesnt it, right at the TB.
That looks like air injection.
The changes in diameter in the PCV don't help much either.
04-28-2012
That is the most Ghetto intake i've ever seen. At least put a rubber coupler on that pvc you attempted to clamp down... There's no way your gonna get hose clamps to tighten pvc. Come on guy!
04-28-2012
yeah its kinda ghetto looking for sure, the first time you go wot, and then hit the brakes, that things coming off. if it hasn't happened already.
pvc has NO flex to it, and can not be clamped. you need a coupler for that part.
and turn the bolts on the clamps so they are under the intake, so we/you cant see them, you got them all uneven and ugly looking for sure.
Last edited by Scottydoggs; 04-28-2012 at 09:07 PM.
04-28-2012
Lmfao....this is why I love this community. Hey, if you have any left over, ill buy it from you. I need a new leech field and that PVC will do just fine.
Sent from my DROID RAZR using Tapatalk 2
04-29-2012
ya sorry bud you really need a rubber coupler to seal that properly, back to home dept!
:4'' HAI\L67 HVTB\HV3\ER Rockers\WP underdrive pulley\Headers\cat delete\91 octane overkill incar tune.3.69 gears, Trans go shift kit.
04-29-2012
Lmao! Who knew that home depot would b the go-to performance shop for ricers around the country! Might as well pick up some gutter guard to make some grills, and some garage door seal strip to make a lower valance.Originally Posted by Grimsin
Sent from my DROID RAZR using Tapatalk 2
04-29-2012
Whats wrong with an HD lip? lol
clamp on straight pvc lol
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
