|
|
04-21-2012
3.5" 3-PLY 45 DEGREE ELBOW TURBO/INTAKE PIPING SILICONE COUPLER HOSE/PIPE RED | eBay <--- pretty much what i bought. which i have a pic of on page 3 of this thread lol
you could use a knife and twist slowly too make a hole, thats what i did when i didnt have a drill.
:4'' HAI\L67 HVTB\HV3\ER Rockers\WP underdrive pulley\Headers\cat delete\91 octane overkill incar tune.3.69 gears, Trans go shift kit.
04-28-2012
Forgot to mention thanks for the link but its too expensive compared to the 2$ PCV pipe we just brought from Home Dept. and clamped that in place very nicely. Question though, what is that little Vac for that we had to make a hole and plug in for? So here it is finished and final, only time we will takes this off is to clean the TB in summer. i should really make a ride thread.
So ya the hole on the pipe was a little to big so we put tape on the edges of the vac and plugged it in and it seems to be air tight, so is ok and what is it for?
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
