Just as an update, hopefully picking up the gasket tomorrow from a dealership after ordering it from OE Parts HQ and never even getting a shipping confirmation email or tracking number. They didn't have any problem charging me though, so I'd advise anyone ordering from there to be careful and contact them immediately if you don't get a shipping confirmation within a day or two. I'll be canceling/returning that crap.
In terms of the retaining screws and screens, I asked Dave at TEP about them and he said that they don't have to be replaced, but can break easily. So new screens and possibly screws won't hurt if you tend to break things :P
And to alleviate anyone of the confusion I went through with the massive amounts of part numbers and revisions to these gaskets, the newest gasket revision for between the channel plate and valve body (the spacer plate has the gaskets molded to it) comes in a kit along with a newer style temp sensor clip (no idea why that needed to be changed) and a new torque signal valve. The part number for this whole kit, at least for non-tapshift 4T65E's, is 24244403. It contains part number 24224544, which is the part number for the molded spacer plate/gasket by itself.
