Thread: Breaking in this section too

We should add a section for the 4t80e....
there will be quite a few w-bodys running them this year

Originally Posted by Sinister Drag Designs

We should add a section for the 4t80e....
there will be quite a few w-bodys running them this year

I was waiting for that. I still want to see someone run a time with a 4t65e at its best and pushed then switch to a 4t80e without chaning anything else and see how it does. Has James succesfully gotten any on the road yet? I havent been reading that stuff on ilgpc for a while.

not yet, we are just figureing out the wireing harness and how to install a 03' internal range switch to the 97+ 4t80 and make it run off of a 00+ l67/l36 harness. We are trying to find a reliable company to rebuild the TC for higher stalls. shouldnt be that long now before at least one is up and running.
once thats figured out the 442 will have both motors powered by them as well the Drag Whore,Vs GTP and most likely erics Riv........i would like to see the impala get one but i will see if its in the budget. i want to spend as little as possible on the 9c1

we are going to be fab'ing quite a few aluminum subframes with the 4 corner mounting so other people will have the option to upgrade.
it will be about time a 3800 series II/III has equal length FWD axles
4t65 FTL