Thread: 97-03 Tinting Tail Lights Except Reverse White Light

I think there is a tail light tinting thread in here that has pics of it. As well as the reflector left untinted.

Both look awful, tint the whole thing and get some high intensity or LED reverse bulbs.

Look for my thread in the visual section. It's called tinting tails, anyway I did this on my buddy's forte. It looked nice. On a gp, I've never done it but idrk how it'll look. I think they look better with full tint but do whatever you think looks good. After all it is your car, not ours if you have any tint questions, shoot me a pm

Get them tinted with everything done run hids. Like I do for reverse

Android Fire

you cant rely on your reverse lights to see anyway. anyone that does hasnt learned how to drive a car yet.

Originally Posted by Bio248

you cant rely on your reverse lights to see anyway. anyone that does hasnt learned how to drive a car yet.

Especially in a W-body.

Mine are blown cause they just fill with water and rusted out the sockets so it shorts out the new bulbs intently

LED reverse bulb man. That'll power through it just fine.

i wonder how mine will be. should be bright as fukt

tape off the white reverse lights with auto painters tape, like this.



while the tint spray was still wet i took off the tape, and cleared over everything.



this is 2 coats of tint, 5 coats of clear, sanded, and hand compounded and waxed, there are still very fine scratches, see only if you are looking for them from sanding, but the porter cable will fix that in due time. 2 coats will cherry them some, 3 will make them black, be careful how much you use, aka how slow or close you are with each pass.



and the reverse lights at night. that were taped off before tinting. stock bulbs.



takes 2 days to do it right, one day of sanding prep and painting and leaving it to set over night or 24 hours, then re wet sand and buff till your arms hurt some.