Thread: VHT Nightshade

Originally Posted by Fem

So I went and bought all the stuff to tint my tails and heads. Chose to start with my brake light for practice.
My brother in law, who claims to have done this alot and been paid to, proceeds to take over without asking and starts doing it. I let him do it because well I assumed he was good at this and I didn't know what to do.

He leaves for San Antonio with instructions to put on a clear coat then polish after letting it dry for an hour. I wait for an hour, go outside and there's cracks in the tint all over the brake light. It looks like complete utter f*cking sh*t. I could have easily done a better job. Seriously the guy just threw on several layers all at once im guessing because that's the only reason I can think of that it looks this bad. Now I have to go spend MORE money to fix this sh*t. DAMNATION.

it dies that on plastic if it isn't prepped correctly, it's too humid out, done outside, done indoors, too hott, too cool.

seriously it's a roll of the dice in florida. i did a few things here and there and i randomly would have that happen when i sprayed everything the same time.

and be careful using vht to tint your heads and fogs as vht is a purple based black

of coarse the only thing i ever tinted with vht was a dead gtp and it took flip 4 hours to sand off. so every vehicle after that has been tinted by flip. the truck had it done 2 times but thats a long story

Shouldnt have tinted your headlights so dark if at all and you forgot your 3rd brake light.

What slick said. Your light output is total **** right now.

Looks good, but I highly recommend gettign some 5000k or 6000k HID headlights now, maybe even 55w.

Doesn't matter, I would never use or suggest VHT to be used on headlights.

Originally Posted by NegativeOne13

Doesn't matter, I would never use or suggest VHT to be used on headlights.

^^ this dont do it like i did...sure it looks cool but unless you are runnin HIDs you might as well be running without headlights

befor wetsand and buff

after


but this was them befor clear so idk if the clear i used was **** or i just did it wrong but i wetsanded with 2k grit between each coat of clear

more buffing needed, did you use clear coat?

looks like i can see scratches still or it just may be reflations the pic, but they lost their shine.

Originally Posted by scottydoggs

more buffing needed, did you use clear coat?

looks like i can see scratches still or it just may be reflations the pic, but they lost their shine.

ill try buffing them more with a machine maby but i buffed them a few times as hard as i could then polished
they look better in person but i know they could be better
and heads look like **** cus inside moister and **** i wetsanded them with restore kit and they shined up a little but still dont look new

this was 2 coats of vht, 5 coats clear, wet sanded and hand buffed,( i used turtle wax liquid compound heavy to medium) i later used a porter cable on them and they got more shine.





this one is still hand buffed.VVVVVVVV

Originally Posted by scottydoggs

this was 2 coats of vht, 5 coats clear, wet sanded and hand buffed,( i used turtle wax liquid compound heavy to medium) i later used a porter cable on them and they got more shine.





this one is still hand buffed.VVVVVVVV

they look like what mine do in person i did 3 coats vht and 3 coats clear