BoostJunki3 
that makes no sense lol......i have some as well and they dont stay on.....Originally Posted by Odi
|
|
06-27-2011
that makes no sense lol......i have some as well and they dont stay on.....
12-12-2011
Another interesting twist.....
I just swapped in the EP28 flasher and some Putco LED bulbs (non switchback). All was good until this morning, when I noticed that when the park lights are on, the signal indicators on the dash are lit up dimmly. Other than that, everything is just fine.
I'm guessing that something is back feeding? Bad bulb?
01-28-2012
FYI.....
I put a diode on each signal wire (dark blue wire) at the front light sockets and that fixed the problem.
12-25-2012
Just reconnect the old wires!
12-25-2012
i guess so. if these work out i'm sure i won't want to change back anyways. the bulb people putting in is the 3157 switchback, correct?
12-25-2012
Yup, 3157. Where you getting them from? If you want to see what they look like you can look at my ride thread.
12-25-2012
id probably be getting them from diode along with some other bulbs.
02-19-2013
When using the new Tridon flasher with the old case can I just use a hot glue gun?
Sent from my DROID RAZR using Xparent Red Tapatalk 2
02-20-2013
You use the OE case so you can mount the flasher in the stock location under the dash.
I guess you could hot glue it back under the dash. LOL
Last edited by Bronco Boy; 02-20-2013 at 09:02 PM.
05-06-2014
I installed the ep28 flasher while waiting for my Leds to come in and everything was fine, installed the signals last night on the front only and still have hyperflash. Any suggestions?
05-07-2014
Very strange. When I did mine I had Spyder LED tails (which have built in load resistors) and LED fronts and all worked fine.
05-06-2014
What year is your GP?
2007 GXP Originally Posted by Scottydoggs
05-06-2014
99 gtp, if it helps any, when I turn the hazards on the blinking is normal speed. Could it be something to do with not having leds all around?
Last edited by OZZY1123; 05-06-2014 at 08:21 PM.
05-06-2014
idk how the relay works on the 99 or if there is one evern... but my 07 there isn't a flasher relay. I had to wire in resistors with my switchbacks.
2007 GXP Originally Posted by Scottydoggs
05-09-2017
I have been looking yet found no luck to how to do this to a 2004 grand prix.. I can't find the flasher and multiple websites say different things.. Its built in the hazard button, its not modifiable, its under the dash, someone halp!
05-10-2017
This is for the 97-03 GP's. 04+ does the flashing through the BCM. Not sure if you can tweak it at all.
05-10-2017
Did you hear that? that was the sound of my heart breaking...
04-08-2018
I know it's a late reply. I installed switchback style led bulbs into the turn signal of the foglamp assemblies on my 04 GP. I bought the bulbs off ebay along with 3157 wiring harnesses that have the resistors with them. Paid $13 for the pair for the harness. For some reason the bulbs didn't want to stay clicked into the harness sockets, had to grind the the ends of the bulb down and they stayed in. You can remove the headlamps and makes it easier to self tap some screws to keep the resistors away from anything that will melt. Everything works as normal. And fyi, the turn signal/running lamp isnt the ck style
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
