used a grinder on the bad spots. wire brush for the small spots and primed it, painted with Krylon for Plastics...its heat safe. i taped off the body and basically painted everything. i like the stealth, but you can just tape it off obviously fro specific parts at paint time. 2 coats and i did last fall, lasted fine though the winter, front pass. has a spec of chip other than that, still looks good. i didnt clear coat it though, forgot grrrrr.
old paint, without any prep after 2 years... young and wasnt thinking, haha
new paint;fall 09. dont have any recent pics on how its holding up, but try to when i put my summer rims back on.
ps: windex, is the best pre-adhesive solution. it's not really adhesive, but used that before paint.
Originally Posted by balzi
used a grinder on the bad spots. wire brush for the small spots and primed it, painted with Krylon for Plastics...its heat safe. i taped off the body and basically painted everything. i like the stealth, but you can just tape it off obviously fro specific parts at paint time. 2 coats and i did last fall, lasted fine though the winter, front pass. has a spec of chip other than that, still looks good. i didnt clear coat it though, forgot grrrrr.
