Here's where to buy them.
I had to drill one hole in the stock bracket (bottom hole), and use the hole for the factory adjusters (top hole).
I then bolted the foglight into the two holes. The only thing that's a little odd about this kit is that it uses a different H3 connector than every other bulb. The white bulb installed with the kit uses the round connector, but the blue bulb that's also included with the kit uses the normal flat connector. You can see the black wire is their round connector and the blue wire is the normal flat connector (I bought selective yellow bulbs from http://www.candlepowerinc.com/). It won't pose a problem, as I can fit the square peg into the round hole (flat connector into the round harness).
Much better. The selective yellow bulb looks blue/silver when off, similar to the Silverstar turn signals.
Installed. These sit forward about 1/2" more than the stock foglights.
I haven't finished wiring these up yet, or even installing the other side. I may do that today, but since it's St. Patrick's DayI may not get to it today.
No, I don't plan on posting any pics with them on once I finish the wiring.
