Thread: Autopia Foglights Installed

Originally Posted by Warhellride

I then bolted the foglight into the two holes. The only thing that's a little odd about this kit is that it uses a different H3 connector than every other bulb. The white bulb installed with the kit uses the round connector, but the blue bulb that's also included with the kit uses the normal flat connector. You can see the black wire is their round connector and the blue wire is the normal flat connector (I bought selective yellow bulbs from http://www.candlepowerinc.com/). It won't pose a problem, as I can fit the square peg into the round hole (flat connector into the round harness).

I got a question for you. Did you just plug those prongs into the stock wiring or cut the plug. I'm kind of confused. Also my kit has the fogs wired into Autotopia's Harness with the spade and round plug like you mentioned for quick disconnect for changing bulbs i guess or to run it a different way.

Where did you mount your switch in your car too. I'm debating on a few locations right now.

Thanks.