thanks but I just got the answer right here
https://www.ddmtuning.com/support/in...loaditemid=156
HIGH-LOW PIN ASSIGNMENTS FOR 9004, 9007, H4 AND H13 BULBS
9004 Pin Assignments
With the flat part of the blue plug on top, looking at the back of the blue plug where the wires are inserted, going
from LEFT to RIGHT, the wires should be:
Ground (Brown or Black) ---- Low Beam (White or Yellow) ---- High Beam (Blue or Red)
9007 Pin Assignments
With the flat part of the blue plug on top, looking at the back of the blue plug where the wires are inserted, going
from LEFT to RIGHT, the wires should be:
High Beam (Blue or Red) ---- Ground (Brown or Black) ---- Low Beam (White or Yellow)
H4 Pin Assignments
With the middle prong on top, looking at the back of the plug where the wires are inserted, going from LEFT to
RIGHT, the wires should be:
High Beam (Blue or Red) ---- Low Beam (White or Yellow) ---- Ground (Brown or Black)
H13 Pin Assignments
With the smooth part of the plug on top, looking at the back of the plug where the wires are inserted, going from
LEFT to RIGHT, the wires should be:
Low Beam (White or Yellow) ---- Ground (Brown or Black) ---- High Beam (Blue or Red)
