Thread: PN for brighter taillight blubs??

Originally Posted by SyntheticShield

Well if that is the case, I may have to find me a spare set of tail lights and try that out.

you'll still need to add in the resistor modules, if you dont want to hack up your flasher.

--- but ---

guess what?

i've come up with a plug and play solution for the resistor modules

Originally Posted by SyntheticShield

See, there you go teasing us again. We need details man, details

well, lets see ---

the tail light harness is one plug on the passenger side of the car. you have access to the left, right and ground here. all that needs to be done is get the male and female plug housings (and terminals) (yes these parts are readily available) and the load resistors, and wire up a short extension harness with the load resistors in it, and plug it in. Obviously, you need to be able to mount the load resistors somewhere. i did some looking, and it should be possible to get a fairly inexpensive aluminum box to put them in and attach them, which will also help with heat dissipation.

if i get the $$ for some decent tail light housings, i'll probably put this together


anybody wanna donate a good set of tails in exchange for one of these harnesses?

Originally Posted by Toasty

you'll still need to add in the resistor modules, if you dont want to hack up your flasher.

--- but ---

guess what?

i've come up with a plug and play solution for the resistor modules

details or ban dangit lol