Thread: went to the track on friday

your not gonna cut much better 60Ft times with 2.93 gears and street tires either. Nice runs

Originally Posted by 01gpgt01

your not gonna cut much better 60Ft times with 2.93 gears and street tires either. Nice runs

Bullhockey ya nut.

I got sub 1.9's on street tires with 2.93's. Driver mod fool.

Duh.

wow, lots of replies. Like I said guys the car has more left in it. It was completely heat soaked first of all, it was 70* and muggy out and I still hadn't perfected my launch.

I honestly feel I could have gotten a 13.8 out of it had I did some cool down and launch perfecting. Even better in some cooler weather.

I was leaving out of the hole just flooring it and flashing the converter with 11.5 a/f ratio and 14* of timing. It was hooking and going with 2.1 60's. I felt I could do better so I jacked up the timing to 20* and spun when I put it to the floor. So, I brought it back down to 16* put the throttle half way then around 10mph I put it to the floor. Thats how I got my 2.07. I feel if I put the timing back to 20* and try the same method I'll be able to do even better........can't just floor it haha.

My shift points are 6000rpm at the 1-2 and 5900rpm at the 2-3, I didn't have a chance to play with them but I think they are pretty spot on. Can't really go over 6K with the stock springs.

BTW, I live in MI and milan is 600' above sea level.

This car is getting E85 and a smaller pulley so this is just a baseline.

honestly I think these times are pretty average guys. But anyway I'm in the process of buying a home so ic, cam etc is out of the question for now. That and another kid on the way.

I'll probably port the blower, block off the coolant passages, N* and do the e85 but that will be the extent for this year. Maybe I'll add an IC to the equation eventually, it would be cool to run 12's with the stock cam.

Originally Posted by bluegtp91

Bullhockey ya nut.

I got sub 1.9's on street tires with 2.93's. Driver mod fool.

Duh.

Sub 1.9's on street tires? They must have awesome track prep.

i have a couple of 14.1 runs with pretty much the same mods same pulley, minus the rockers and the LS6 maf, 2.1 60' on RS-A, i was thinking of rockers really hard for a while and everywhere i looked recommended 105 springs for 1.9s and 1.95s.

Because you need springs IMO...on anything higher than 1.84:1 rockers.

Welcome to the midwest...gotta do something right since we don't have internet and indoor plumbing.

to be honest the LS6 maf doesn't do squat in terms of power with my combo. I bought it so I can run my wet kit without needing a TB spacer.

I was unimpressed with the rockers BTW, didn't notice much a gain at all.

mods in sig.....13.2 @ 104 full weight, heavy wheels and street tires. had a 3.3 on at the time as well. E85 you will love it.

Originally Posted by BoostJunki3

mods in sig.....13.2 @ 104 full weight, heavy wheels and street tires. had a 3.3 on at the time as well. E85 you will love it.

I do plan on converting. I expect some nice gains.

Yea and Im sure that gen v helped a little

Originally Posted by 04boostedindyss

Yea and Im sure that gen v helped a little

This...with a pulley size equal to what...a 2.8" on a GenIII?

Yeah...lol

I was shifting at 6300 on stock springs and 1.84's LOL...do I recommend it? Far from likely