Found a deal on some 18s ser rims from altima has anyone seen them on a gp?
|
|
03-04-2013
Found a deal on some 18s ser rims from altima has anyone seen them on a gp?
03-04-2013
hub bore is too small, won't fit over the stock hub.
03-04-2013
Really well that suck for other Nissan models like maximas and 350a will need a hub ring to fit them right
03-04-2013
Figure our the stock specs compared to their specs and you'll have an answer.
03-04-2013
Wonder if one were to use something like a spring laded brake cylinder hone if you could make it work? Sounds like a hack job but **** its only a couple of mm that need to be sacrificed.Originally Posted by Bio248
03-05-2013
if you want to open up the hub bore of the wheel then by all means that will work.
your other solution is to run a spacer to clear the 'lip' on the stock hub, but that isn't exactly a good solution.
03-05-2013
What's the worst case scenario that could happened if ran with spacer?
03-05-2013
Worst case scenario? Could snap the studs off, causing the the rim to come off in high fashion, and causing a wreck.
Chances of that happening tho, very very slim.
03-05-2013
you need a fairly hefty spacer to clear that lip on the hub.
Originally Posted by Bio248
Originally Posted by Kilroy
03-05-2013
Gotcha going to pass then hated that most imports hub size is different
03-05-2013
any machine shop worth their name can mill out the hub bore on a set of wheels in 20 minutes.
but most people arent willing to do that kind of work on a wheel. it'll really affect resale value.
03-05-2013
I'm undecided because I have no idea how they would look on a gp, what you think are they worth it or not? Just want a different opinion
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
