if you jumped the relay and it worked it has to be the relay i would think
|
if you jumped the relay and it worked it has to be the relay i would think
Thats what I thought too, but I've tried a new relay and that didn't do it. I'm going to test the relays I have with a multimeter tomorrow.
Just to clarify, when I say jumpered, I mean that I used a paperclip to bridge the connections in the socket where the relay goes, not sure if I'm using the correct verbiage there or not.
Thanks!
EDIT: Actually... I just went and tried two more relays. No difference. I also stuck a new fuse in Fuse 28, which is labeled A/C CLU/ABS IGN on the schematic I have. No dice.
Here's the schematic I was looking at:![]()
Last edited by rs2sensen; 07-24-2011 at 12:17 AM.
« Previous Thread | Next Thread » |
Tags for this Thread |