Swaping engine and trans from top ( first timer)

[Bronco Boy]

It seemed to fit perfectly where scotty said. Why you squashing my vibes bronco?

Sorry. LOL

That's why I said "I think'. I'd believe Scotty over myself anyday. LOL

[steelholder]

It seems to fit well where you said. Is there a diy vid anywhere on how to bond two wires properly with a torch? Do I need to add anything to it?

I can't seem to find a location for this guy, hes right next to the big circle sensor that goes into trans.

[Scottydoggs]

you made me make sure i was thinking right. that terminal looks not original to me.

[steelholder]

I meant to bond the wires from the trans sensor to harness

[steelholder]

Does anyone know or can possibly check where the wire next to the big circle trans sensor runs to? The pic is right above runs by the air box

[Scottydoggs]

maf sensor? its in the intake tube.


you can solder with a torch.

[steelholder]

maf sensor? its in the intake tube.


you can solder with a torch.

Isn't that one purple in color? This little white and blue one doesn't seem to have a fit

[Scottydoggs]

where ever it goes, its with in reach of where it is now. a/c plug, or something. didnt you take some ac relay stuff apart over there that bill said you didnt have to? maybe it goes there?

[steelholder]

I'll double check that. I was looking at the gp pics and it seems to be an air intake sensor that goes into intake house except my hose doesn't have a plug for it..hmm

[Scottydoggs]

i see your wire up on the abs pump there, check up there for its home.

[Scottydoggs]

I'll double check that. I was looking at the gp pics and it seems to be an air intake sensor that goes into intake house except my hose doesn't have a plug for it..hmm

your maf and ait sensor are one unit int he intake tube.

[Scottydoggs]

you know what, being thats a blue plug, see if its the plug to the rack, if it reaches to the shiftier area thats it. the wire off the rack is on the drivers side off the round part with the grey boot to the cars cab.

[Scottydoggs]

see the plug on the rack there. its blue on both sides.

[steelholder]

When I tried connecting the pos cable sparks went flying,I thought I had everything right...

[Scottydoggs]

when you tried to connect it where? last pic i saw it was on the battery already.

[steelholder]

As a matter of fact it may have tried to turn on and crank put I immediately let go. Is this normal?

[Scottydoggs]

are you putting the pos cable on the starter with it hooked up to the battery still??????

[steelholder]

I disconnected it to clean out the port I had everything ready so I tried connecting and it almost sounded like it was trying to turn on

[Scottydoggs]

if you touch the large stud and the little one with a live cable it will crank the engine over, its how you jump the starter, so you had the cable with live power while putting it back on the starter right?

[steelholder]

No i disconnected it from the battery when i was connecting everything down there im trying to picture what ive done wrong. I followed all the oics and wire orders for the starter.