Can anyone diagnose a possibly tune related issue?

[nitehawkjcb]

Update: CASE relearn didn't help.

[ADrugDealer]

Alright, 103's are a tad cold... You could try AL 104s or Factory iridium plugs. Do not get the platinum ones, the car hates those lol

[nitehawkjcb]

OK, I'll swap them back out with the 104's and see what happens. Any particular gap? I always used .053.

[Scottydoggs]

you can try 60, 55 53, and so on. 0.50 felt best in my car. but they are all a bit different in what they like.

[ADrugDealer]

Honestly man, I forgot what I gapped to last time. Google around or ask in the chat box.

[Frosty]

Update: CASE relearn didn't help.

Contrary to what some believe... a case learn is ONLY to get the KR monitoring and misfire monitoring systems working correctly and accurately.

Get us a basic scan of the startup and warmup. If possible make sure your wideband is logged as well (Incredibly useful). Then we will go from there.

[nitehawkjcb]

Thanks for all the replies. I'll post a scan late tonight when I get home, the wideband isn't installed yet, gotta do exhaust work for that.

Edit - any particular parameters? I did basics (boost, baro, inhg, kph, kr, rpm, etc), but can do another scan if it would be helpful to have other parameters.

[Frosty]

Commanded Afr, o2 MV, long term and short term fuel trims, timing advance, ect, maf hz, maf lbs, map psi..... Those things.

[nitehawkjcb]

Thanks Frosty. I'll do another scan, I'm pretty sure I left out MAF hz, maybe O2, and LTFT.

[Frosty]

Basically whatever the default hptuners scanner does plus commanded afr.

[nitehawkjcb]

I'll see what all I can add. I'm using a Powrtuner.

[Timing]

I wouldnt be tuning a car without a wideband imo. Car sounds like its running to rich at idle.