For those that have completed this project, I have a question about how the projector sits in the headlight housing.
I was tinkering on a light over the weekend. I got to the point of checking my alignment, and am fighting to get the beam to match the OE beam; it wants to be inboard.....
And I had to go out so I put the housing in a spare mount and hit the local Ikea to do and in car test.
I'm sure I could get the projector sitting in the right spot, but it doesn't sit naturally. And from what I have seen from all the other retro's, the projector sits nicely (possibly centered) in the hole of the housing, where as I have to force this one down and inwards. Just doesn't seem right to me.
