I am finally ready to start using my wideband to tune. I read this post that shows how to use the EGR brown wire to read the voltage output from the wideband to tune.
http://www.grandprixforums.net/threa...R-using-UVScan
I was unable to find a write up for logging with the DHP green analogue connector that connects to the box. I was wondering if anyone had any info on what pin should I connect the 0-5V output wire to? And how to calibrate it using UVscan? I would like to log my wideband without having to go through the EGR connector if possible.
