Alright so today I started the tear down on my 98 coupe gtp. Starting pulling off vaccum lines and a lot of the "T" shaped boots starting cracking and breaking. Where or how can I either get new ones or fix the ones I have?
|
|
05-17-2014
Alright so today I started the tear down on my 98 coupe gtp. Starting pulling off vaccum lines and a lot of the "T" shaped boots starting cracking and breaking. Where or how can I either get new ones or fix the ones I have?
05-17-2014
Actually better yet, where can I just get a whole set of the boots
05-17-2014
Just buy 6' of vacuum line and some plastic t's and make your own
05-17-2014
You can get them from your local auto parts stroe
Originally Posted by theaceofspades
05-17-2014
if you have a advance auto near by stop there and buy the new T's there, they have the best ones i could find at any local store. nice small white t's. come 2 in a pack, for 2 bucks.
everywhere else has these crap 3 inch t's that just dont fit well. ok for temp but they are huge lol
cut 1 inch of vac line put it on the t, then to the fpr or the nupple under the snout then put vac lines to the other ends. it cost about 5 bucks to repalce most of the vac lines when i did my lim. check the evap line too, the fat line off the TB. it loves to break.
05-17-2014
Thanks guys, life savers! Another thing now, pulled the injectors out and they are terribly gummed up. How can I determine if they are still good or not? I'd rather not buy a new set considering I've already spent close to 1000 in gaskets and parts for this thing and injectors would set me back another 480 from my parts store.
05-17-2014
gummed up? like the tips from where they wer ein the heads? thats oil, clean them up. oil the o rings with clean oil then slide them back in.
05-17-2014
You could also grab a new vaccuum line set up from the dealer I think I paid like $12 a few months ago when I grabbed one.
05-18-2014
What the heck did you buy that cost $1000?
| « Previous Thread | Next Thread » |
| Bookmarks |
Bookmarks |
