Ah, I think I'll keep the mufflers and toss a res on too. 3800s aren't the greatest sounding engines.
|
Ah, I think I'll keep the mufflers and toss a res on too. 3800s aren't the greatest sounding engines.
res and no muffler sounds like crap.
the res makes it tolerable.
I have been thinking about three glass packs. One 2.5 x 30" for a resonator then a couple 2 x18"ers where the muffs were. And the split tips off a 40th GTP. I bet that would be fairly quiet.
I don't feel like spamming pics so here is the album http://imgur.com/a/IpRoK#2 but, anyone see anything wrong in these pics besides the crack on the sway bar link thing? Wetness is from car wash previously.
Oh rats I thought i might need lcas because the one thats wet doesn't look right. Might that cause the car to wander on the highway, or me to feel a kinda "clunk" or something shifting in the steering while turning left like curving on an onramp? Also my sway bar creeks bad somedays or when going up into a parkin lot on an angle that's steep wouldn't surprise me if its breaking.
the main sway bar bushing can creak. the lca's are new ball joints as well so it could make it wander, (and they clunk) but so could tie rods.
jack each front tire up, one at a time, lugs tight, push and pull at the 3 and 9 o clock areas of the tire, you'll feel it clunk if the tie rod is bad. if you look at it you can also see if it moves.
while my boyfriend worries about his car, i feel like downing a bottle of wine..![]()
did that earlier today, no movement or clunk that I heard. I can feel in the wheel its hard to explain like something is loose then hits one side and you can feel the impact but only when going like around a roundabout or onramp when the car has more momentum and sometimes corners but it doesn't happen everytime around corners. I can't think of how to describe it lol.
Well, looks like I'm doing LCA's and sway end links in a few weeks. Now I need to decide if I should upgrade the sway bars with the gmpp kit and new KYB strut assembly's already have Monroe ones in the rear.
Edit: These the right end links? Has heart for top seller or whatever: http://www.rockauto.com/catalog/more...775&cc=1382532
Thanks Scotty![]()
Kyle I have a garage you can work in if you need it
Okay, I'm just trying to decide if I wanna do it before I move or not
Sent from my Galaxy Tab 3
Gonna have one of these made when I get new plates for MI cuz I only need a rear plate.
![]()
« Previous Thread | Next Thread » |