Soo the guy who just installed my headers, said to me that i have the wrong plugs in my car, and i said what!! He said the heat range is fine but it's the copper that is bad, but i thought autolite 104's are fine?
|
|
07-03-2008
Soo the guy who just installed my headers, said to me that i have the wrong plugs in my car, and i said what!! He said the heat range is fine but it's the copper that is bad, but i thought autolite 104's are fine?
07-03-2008
copper retains less heat than nickle plated, platnum ect. Thats what you want. May not last as long but is good at fighting kr. He said the copper is bad? as in the plug is bad? or did he say it was bad to have copper plugs in your car?
07-03-2008
What headers did you get installed?
07-03-2008
Copper is bad in the car, I got the slp headers
07-03-2008
He also said my tranny fluid was black!! So right now i am doing research, i heard tranny flushes are bad soo i might just drop the tranny pan myself and just change the fluid and filter, i got 2 gallons of dextron 6 in my room soo all i need is a new filter and ill change tht asap.
07-03-2008
copper plugs are not bad, you just have to change them more often.
if your tranny is shifting fine and acting normal then leave the fluid alone.
07-03-2008
Whoever installed your headers is obviously an idiot and probably does'nt need to be doing mechanic work. For any kind of performance application your not going to see someone that knows what they're doing running anything but a copper core plug.
Just becuase a plug is platinum, has four electrodes, costs a fortune, and looks pretty does'nt mean it's a better plug for the application.
As for the tranny, don't get it flushed. Drop the pan, replace the filter and put new fluid in it.
Or if it's really bad change the filter and put cheap fluid in it. Drive it a few days then do it again but put your quality fluid in this time. Also take the time and remember to clean your tranny pan while you have it off as well.
07-03-2008
No the tranny isnt acting fine, i dont blame it, 3.4 pulley with supporting mods and it has almost 157k on it. What the tranny is doing right now, is when im cruising any speed (not stomping on it) the rpm's go back and fourth not by alot but you can also feel the car like rocking back in fourth, soo something is up with the tranny. Also whats annoying is it upshifts all the time when im going up a hill going 50 lets say it loves to just drop down to low rpms and bogs down unless i step on it. Well the tranny fluid is really black.
07-03-2008
The tcc lockup is going out....possibly a leaking valve body or worn input seal. Mine lasted a cupple days after it started doing that...you dont have long before you need a new one. Fluid was black on mine too now that you mention it. and thats after i changed the fluid when i first bought the car about 10000 miles before it failed....sorry to say it but ur gunna be left on the side of the road soon with all gears but park lost...or in the middle of the road like me....came to a stop light it turned green...all gears gone except park lol
07-03-2008
thats happening to mine too. my TCC doesnt lock on the freeway anymore and it surges when im cruising in low 4th gear. it has been doing this for months. my fluid, however, is not black.
07-03-2008
fwiw, The 104's are fine and good to a max of 10k miles. Only the core is copper. That means in the middle of the center electrode there is copper burried in there.
A solid Silver center electrode non resistor plug is the best racing plug. See Brisk and Nology. However the AL 104 is a cheap plug and works fine. I'm running iridiums this monthand have run god knows how many other plugs, and none were any different as far as KR goes.
07-03-2008
Thats how mine started...ever so lightly when i first bought the car....then it began shaking when tcc would apply 10000 miles later and ...yea...i added some mods that didnt help too...Originally Posted by Bio248
07-03-2008
im not expecting it to last forever. im expecting it to last a few more months so i can have money to get a new tranny.
07-03-2008
yeah i know i was just letting you know....i wish someone would have givin me a time fram for mine...i figured when it did broke i would just loose 4th gear or something...or no tcc lockup any more lol...i found out the hard way...just giving yall an idea on what might happen
07-03-2008
Sounds alot like when my civic's tranny died, altho it would go forward once I revved it to 6000 rpm's, and mine went out during mid throttle on the interstate @80mph...damn auto tranny's lol
07-03-2008
yea funny thing was when i would turn the car off for a little while and start back up it would be fine for a cupple minutes....slipped like a son of a gun though
07-03-2008
Mine did the same thing... cooler fluid is denser and i guess helped grab the gear for a bit
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
