Thread: whats a good 60 foot time?

been there before myself...Id like to see close to 9 flat once I do a ubend delete,pcm, and a 3.5 or 3.4 pulley (depending on kr) which prob. wont be till later this year... married men dont get to buy toys that often lol

hehe i wouldent know about that but i could imagine. i would think with a 3.4 pulley and a good tune you should be in the 8's and that should be good for high 13's in the 1/4

Man id love to see 8's.. just want it to be a reliable D.D.... I wonder how my 60' would turn out?

Check out these 60' times and the close race against a Z28

Originally Posted by Boger's99GTP

Man id love to see 8's.. just want it to be a reliable D.D.... I wonder how my 60' would turn out?

probably worse without slicks

you think so?? i figure dr's would be good enough. heck even some good worn down street tires and a little extra feathering and you should be able to get the same 60's

o and it should still be a reliable dd. problew even better once you get it tuned.

Originally Posted by blowfishRus6

o and it should still be a reliable dd. problew even better once you get it tuned.

Cool deal.....Just have to find a good tuner here in N.C.

if your going to get somethings done and then keep it that way for a while, overkill is awesome with there pcm's but if you change anything you need to get it retuned.

Originally Posted by blowfishRus6

if your going to get somethings done and then keep it that way for a while, overkill is awesome with there pcm's but if you change anything you need to get it retuned.

Ive been looking into Overkill's pcm's...id do a u bend delete, Cerama-Coat the crossover pipe (I do gunsmithing on the weekends so I have plenty to use) maybe 2.5 or 3 in. dp and 3.4 pulley before I do a pcm. I wouldnt install the pulley untill i got the pcm in first (prob both on the same day)

do you plan on leaving your car alone after you mod it?....thats it...no changing pulleys,exhaust or anything?

Originally Posted by TDCRacing

do you plan on leaving your car alone after you mod it?....thats it...no changing pulleys,exhaust or anything?

well im trying to be a lil on the light side due to the fact I still want it to be a reliable D.D....(words from the wife....you married guys know what i mean) but id like to see a pem or headers on it as part of the exhaust and maybe some 1.9 rockers... how much boost will the 3.25 pulley push?

Originally Posted by Boger's99GTP

well im trying to be a lil on the light side due to the fact I still want it to be a reliable D.D....(words from the wife....you married guys know what i mean) but id like to see a pem or headers on it as part of the exhaust and maybe some 1.9 rockers... how much boost will the 3.25 pulley push?

ummm maybe about 14 or 15 psi. don't really understand ur statement above becuse im not married but i can tell you to look at my mods in my sig and tell you that my car is in fact my dd. and is reliable.so tell your wife i said so. I don't think that will make a difference tho lol

dang a 3.25 pulley makes that much boost????

Originally Posted by TDCRacing

ummm maybe about 14 or 15 psi. don't really understand ur statement above becuse im not married but i can tell you to look at my mods in my sig and tell you that my car is in fact my dd. and is reliable.so tell your wife i said so. I don't think that will make a difference tho lol

I told her.. she just smiled.. but said as long as he's a good source...ill consider it. I was like trust me... he is lol

if i remmember correctly

so how much boost do you get out of a 2.8 pulley???