Thread: Gtx has a turbo!! lol

here's the other side of the motor mount

here are also some sensors you disconnect by the power steering



You do need a specialty tool to remove this

You don't need a special tool to pop the ball joint.

Originally Posted by dsmuts

You don't need a special tool to pop the ball joint.

what did you use?

A mallet

I saw a lot of these pics on instagram lol. I was just looking at hashtags and found them

to pop a ball joint, take a floor jack handle, or pipe, put it under the frame, and then near the ball joint, then stand on the pipe, have some one whack the lca with a hammer, the ball joint will pop right off with out any damage to the boot, unlike a pickle fork that tears the dust boot up every time.

Originally Posted by Scottydoggs

to pop a ball joint, take a floor jack handle, or pipe, put it under the frame, and then near the ball joint, then stand on the pipe, have some one whack the lca with a hammer, the ball joint will pop right off with out any damage to the boot, unlike a pickle fork that tears the dust boot up every time.

Oh OK I'll have to try it, my buddy has the fork I didn't know it messed up the boot, I'm going to pick up my check now to get fluids and swap out the motor

Other motor pulled



Meeting its new home for now
Resting in its mounts

when I get off work tomorrow I'm going to put the exhaust on And connect everything, I put in a new trans filter as well also broke my neutral switch on the trans so I bought a new one Can't wait to get My SSC springs 1.8 drop and 1.6 what do I need besides anti Pogo washers

And might get tog headers what do you guys think

Suggest new struts while your at it

I would but I'm short on cash it will come later down the line

I got all my fluids in tranny filter and car is up and running nice at work till 11 tonight but here are a few pictures

A
A
A
A

i think you should buy my shift kit like you said you would several times now lol

Originally Posted by Matt Palm

i think you should buy my shift kit like you said you would several times now lol

Lol sorry Matt I do want it let me see if I can sell something to get it off you
But on the other hand can I get this center console and install the e brake over there as well?

I would like to maybe mix mine with it or something

Originally Posted by spazzz

Damn good job!!
why is the front so high and the back so low? Did you put the SSCs on?

Why thank you and no it stock in front I jacked up the car and his cut springs in the front fell down lol I need to get some cash and I'll buy them I also found coilovers on cl don't know if I want to spend the extra cash to get them

Wow it looks awesome and so clean!

for the color as well