Quote Originally Posted by pontgp02 View Post
hey that looks sweet! never thought of doing that
thanks!
Quote Originally Posted by DanPrixGTP View Post
Hey eddie maybe you can help me, not trying to thread jack BUT crazy, i was just swapping my needles today.

First Question: How did you trim the speedo needle?

Second Question: I believe my engine temp gauge is a little off, how did you set yours?

Third Question: See how this black plastic piece is longer on the 04+ needles, where it slides into place, Does this need to be cut down to the same size as the "stock" needles? (Same with the RPM Gauge)

Fourth Question: Setting the Speedo is a PITA, how did you manage to do correctly?
it was a little difficult you have to trim the speedo needle to the size yours is and the rpm gauge will work fine no need to trim that my temp gauge was fine and my fuel gauge doesn't work, but to calculate that i would just fill your tank up and set it on full. the speedo is difficult to set
Quote Originally Posted by 99pgpgt View Post
Trim the speedo needle with scissors or a razor blade cutting at an angle.

Engine temp shouldn't be off, same with fuel.

Trim the black piece down to the stock needle size.

Use either your Aeroforce, gps or whatever you have that can calculate your current speed and set the cruise to 60mph and set the needle on 60.
he pretty much summed it up for ya
Quote Originally Posted by DanPrixGTP View Post
I Have HUD that i can use for speed. and you mean actually have the needle off completely, set my cruise at 60, then push the needle into position at 60? I was doing that, but its just touchy, right now its off by 3mph... and can it be at any speed and not just 60?
it is a PITA to do mine is off by like 1 or 2 mph but it doesn't bother me much