Your car has the potential to max out an M90 with a correctly dialed in snout pulley.
It will be maxed out within... reasonable funding, minus the short deck rebuild IMO.
Printable View
Your car has the potential to max out an M90 with a correctly dialed in snout pulley.
It will be maxed out within... reasonable funding, minus the short deck rebuild IMO.
The last item on my list is Comp Cam Lifters or an aftermarket rocker that would work with my cam and heads.
The ZZP Aluminum heads just have the springs and retainers on them currently and i dont want to reuse my stock stuff.
Why not just use stock lifters and rockers? There's nothing wrong with either of them for an involved build.
I guess you're only real option for rockers are YTs from one of the vendors. Intense has the most ratios to drool over.
maybe,Quote:
Originally Posted by Sandman
BREAKDOWN STARTS TONIGHT. Photos to follow!
All the parts are loaded up going to drop them off at the shop and burn the midnight oil and break it down so it can get sent to paint and the machine shop
http://i917.photobucket.com/albums/a...l/ec43c01f.jpg
http://i917.photobucket.com/albums/a...l/e2d0c127.jpg
http://i917.photobucket.com/albums/a...l/0ae61628.jpg
http://i917.photobucket.com/albums/a...l/23b6f214.jpg
http://i917.photobucket.com/albums/a...l/2791f1db.jpg
http://i917.photobucket.com/albums/a...l/d5fd11e9.jpg
http://i917.photobucket.com/albums/a...l/ae286d33.jpg
http://i917.photobucket.com/albums/a...l/72eb8bd9.jpg
http://i917.photobucket.com/albums/a...l/e0fe4fc3.jpg
keep the pictures coming! the more the better
well we only had an hour and a half tonight for the teardown.Quote:
Originally Posted by DanPrixGTP
Got a pretty good start just had trouble finding the fuel line disconnect tool.
anyone got a HP tuners file for a build similar to mine? would help a great deal for my tuner when he gets around to it.
Round two begins today, So far got the AC pump, headers, Starter off. disconnecting the transmission stuff now
http://i917.photobucket.com/albums/a...l/697bc62a.jpg
http://i917.photobucket.com/albums/a...l/88e4db7b.jpg
http://i917.photobucket.com/albums/a...l/c1b16773.jpg
http://i917.photobucket.com/albums/a...l/bd2a3233.jpg
http://i917.photobucket.com/albums/a...l/3db3747e.jpg
http://i917.photobucket.com/albums/a...l/c7d31db7.jpg
and then we broke a engine bracket...
http://i917.photobucket.com/albums/a...l/cffcb504.jpg
http://i917.photobucket.com/albums/a...l/f3c80a83.jpg
http://i917.photobucket.com/albums/a...l/0acdde85.jpg
http://i917.photobucket.com/albums/a...l/94a9ca27.jpg
Merry Xmas fans, also does anyone have an extra bracket i can buy? hit me up!
You should have pulled it up out on those bolts threaded into the heads alone.
Those brackets are aluminum.
pulled it using that bracket last time just fine.Quote:
Originally Posted by AjL227
I think i have that bracket it's the driver side one right?
Yeah, the one near the Crossover/intake/TB sideQuote:
Originally Posted by dsmuts
yep i got it i just found it under some other stuff in the garage. I'll send it to you for whatever shipping will be. Probably around $10 or less.
outstanding, If you are capable send me a photo of it to spartangl@gmail.com also send your paypal emailQuote:
Originally Posted by dsmuts
Thanks
Just e-mailed you and sent a pic
got it and replied..Quote:
Originally Posted by dsmuts
paint guy said he is booked till after new years (delay #1) and i haven't spoke with the Machine shop since November so i dont know if that will delay me or not..
I pulled mine out the same way, before someone else told me never to do that.Quote:
Originally Posted by Spartan GL
You win some, you lose some.
Cheers for cheap 3800 junk.