Printable View
Good thing it's still SUV height, lol. 600 grit? Man, my driver's side was so bad I had to go down to 220, 400, then 600. Still has all those little cracks in it. Does spar cover or fill those, btw?
I did find that making disks for the mother's kit was pretty easy with gorilla glue and some .25 felt from walmart. :th_thumbsup-wink:
The urethane didn't penetrate into those cracks, so I still have them too. But, it still came out just fine and looks so much better. My reverse light bar I took down to 120 grit, the VHT kept cracking as it dried... So I sprayed carb cleaner and melted the plastic, scraped off a good 1/8 inch and kept sanding until I got down to undamaged plastic. I guess the factory UV coating didn't do sh1t. Lol
Originally I was just going to clear the reverse bar and tails, but I decided to tint them because nobody else up here has nearly as good looking of a GP as mine, even when mine is dirty, scratched and dented. Lol
I still somehow manage to set mine apart from the rest, just by taking some time and TLC.
BTW, anyone know the part number for the SE rear diffuser?
PN# 19120590
When I checked weeks ago, the lowest price SHIPPED (before someone jumps on my case) was at http://parts.royaloakschevy.com/
Shipped to AK? Not sure.
There's a dealership up here that will get me the SE front lip for ~530-ish... Which would be about the same as ordering it online plus shipping, if I was down in the lower 48.
Lol I'll check the shipping, then go over to the Chevy dealership and ask there. Probably gonna be cheaper through them lol
Edit: site says shipping is the same, 45 bucks. I'mma have to save that link. Lol
I decided 3 inch black pvc plumbing parts are a good fenderwell intake design. Lol
https://farm5.staticflickr.com/4154/...c821a3be_o.jpgFWI by Ben Stryker, on Flickr
https://farm5.staticflickr.com/4010/...823cdd34_o.jpgNot so blue anymore... by Ben Stryker, on Flickr
That filter used to be blue... Lol
I think I'll go with red next. Maybe yellow or green, there's all sorts of colors at O'Reilly's.
Edit: let the car get stupid hot, then parked and chilled for 30-45 minutes... Ambient temp was 95°, intake temps never hit over 98°. Success!!!!
Lol I guess PVC is a good insulator against heat.
Total cost of this FWI:~65 bucks, including filter for 25. The most expensive piece was the 2 foot section that I had to cut down to ~9-10 inches, which was 12 bucks, and the elbows were 5-7 bucks each. The coupler is thicker than the silicone ones and 5 bucks.
I've been looking at doing some LED conversions, but there is little to no information on most of it, like the DRL reroute, or adding things like LED halos to the DRLs and changing the side markers to turn signals...
And Diode Dynamics don't have a conversion kit for us 7th gens. It's been 12 years, what's the holdup? Lol
I'm going to do some trial and error, figure out how to do it myself and post up a how to once I get it all ironed out. Anybody with ideas or experience, feel free to let me know so I can include it.
I also can't find the clear corner inserts for us.
You start to have crazy weird dreams when you stay up all night and sleep during the day... like twin turbo/RWD conversions that you can look closely at in your dream, but when you wake up you forget all the details you saw and scoff at the idea, it being too much work for not enough return, or knowing the expenses and fabrication that would be needed....
I would love to have the oppourtunity to try it though.
Hopefully all of the parts I'm ordering will be there when I get back... and I will still have more parts to buy. lol
The joys of just starting to mod...
Cough cough
Sent from my iPhone using Tapatalk
Eh. I get the pick of the litter from demods.
And since nobody else here has a modded GP or even a non-wrecked w-body, mine will be the coolest. :cool: lol
My wife says she drove it around the block today. I don't know if she was being facetious or not...
Either way, at least it's not sitting for three weeks without running, she did send me a pic of it on from the driver's seat.
wife turned on the car, took a vid of it cuz it "sounded funny"
All I can hear from the back end of the car in the vid is rocks in a tin can, I ask her to hit the exhaust tip and listen... something is not stayed put.
Guess I'm looking for new-er mufflers. lol
Borlasssss
I'll cut the stock ones off and see if something is stuck inside them first, that res is about to fall apart. lol every time I get under it I find a new soft spot, almost put a hole in it with my thumb last time.
But Borlas... mmmmmmmmm. :)
And now I gots a spoiler and roof rails coming. :cool:
Bought a GXP spoiler today.
The white one in FS?
Yup. I'm gonna get a quote for getting it resprayed tomorrow, then decide if I want to buy a couple cans of duplicolor and put in some elbow grease. Lol
DONT buy duplicolor. The silver doesn't match for ****. I'd go to a body shop, have it color matched, and have them mix some paint in a rattle can for you. It'll match better and lay down WAY nicer
Huh. Well I'm glad someone chimed in with, I'm guessing, previous experience?
Us Galaxy Silver guys gotta help each other out. Lol
Yep, lol. The color match wasn't great to begin with, but no matter what you do, it lays like butt. It looks really dark where the spray begins and the rest looks blotchy after that. I resprayed a bunch of stuff underhood with the body shop rattle can and it made a world of difference