Thread: Redneck rusty rear strut tower fix

bartered a turbo kit install on a 97 bonnie for a free 97 5TP, fixed up with used parts/motor laying around, beater car, drive to truckyard, sits for 3 weeks, drives home.

i made a 25$ dodge intrepid last 7 years after driving it home 127 mile just downshifting and using the parking brake with the lock disabled since the 4 brake lines had rotted away as it sat under a big tree for two years. sold it a month ago for 650$ after i got an 04 gtp clone for 2500$

heaps are perfectly safe, not like im taking em up to 80mph

Originally Posted by Turbocharged400sbc

bartered a turbo kit install on a 97 bonnie for a free 97 5TP, fixed up with used parts/motor laying around, beater car, drive to truckyard, sits for 3 weeks, drives home.

i made a 25$ dodge intrepid last 7 years after driving it home 127 mile just downshifting and using the parking brake with the lock disabled since the 4 brake lines had rotted away as it sat under a big tree for two years. sold it a month ago for 650$ after i got an 04 gtp clone for 2500$

heaps are perfectly safe, not like im taking em up to 80mph

what exactly is a gtp clone?

Originally Posted by idrivejunk

Amen to that, I drive junk!

Theres a BIG difference in what I can do for myself and what I can recommend that others do though. We all just do the best we know how, at the time.

never buy a mechanics car....we know just what we have to fix enough to keep it going....

Originally Posted by REDCOMPG

Yup and I'm voting to delete this thread the last thing you need is a redneck fix.. And someone doing it and something goes wrong.

something goes wrong lol. id rather have wedged the 2x4 and 1x4 in there before it popped, then it wouldnt have moved.

if the ride height change at the right rear is such a worry for you then id assume youd rather someone have blocks of wood in there before it falls the **** off and in the ensuing wreck, a 500$ jalopy slams a schoolbus off a cliff like it was eating crackers in bed.

Originally Posted by hensleya1

If you've just started out with a welder and want to do it yourself I'd obviously say to get some practice first... that's going to be a precision weld - you'd need to be within a couple degrees in order to allow the wheel to be aligned right afterwards. Plus the welds would have to be mighty strong so they don't let go at an inopportune time.
Me, I don't have welding tools. Lumber becomes the next best option, although admittedly it's like getting an award for being the tallest midget... you're still short.

get it within a 1/4 inch and yer good, if you have a 1/4" gap at the outer seam thats rotted away from the reinforcing plate, the car will sit 1/8th inch lower on that corner, and maybe have 0.2* more neg camber...hardly an issue.

if your worried about yer welds just shove some wood in there for just in case it breaks....haha

Originally Posted by dsmuts

what exactly is a gtp clone?

just an 04 gt1 stripper, L67/32, 3.29 diff, misc. sleeeeper with the 06 single exhaust and valence swapped on