Quote Originally Posted by Scottydoggs View Post
thats the one. i dont have one on the driver side for sure.

i drilled a hole under the windshield, took the pass side cowl off and deep under the windshield i drilled for a amp wire. it dropped right out the bottom.


if its for a oil pressure wire you can stuff it through a grommet on the driver side firewall.
I've been putting this off cause it's so cold out and I dont feel like being out in the garage more than I have to.

The grommet on the floor there is pretty tight, how do you fit wires through it? Put a new hole through it, or cut the hole bigger maybe?
Any clue where it comes out in the engine bay? I cant see it anywhere. It feels like the axle or the steering rack might be right in the way.

Where is a grommet on the driver side firewall? I read there was one directly under the master cylinder where the clutch cylinder goes on stick cars that's just empty on automatics, but I cant see it. It looks like there might be one on the side... any idea where that one comes out in the cabin or what I need to do to get to it?

Just looking for some answers so I dont stupidly tear stuff apart I dont need to in the cold.