Quote Originally Posted by Bronco Boy View Post
Ok, the cut that I forgot I made was to the top left corner (looking from the front) of the projector. In the picture, looking at it from the rear, it is on the top right. Looks to be about 2mm, which gave me the clearance to clock the projector to get proper alignment.


Yes sir, had to make the same shave. Hey I noticed those lights you have are the TYC brand. The brand I got was eagle eyes and I am noticing that the interiors are different from the drivers side and the passengers side. I looked at my factory ones and they are dang near identical. It must be the molds for eagle eyes because i got two pairs (for mistakes) and noticed both pair are the same way, not identical on the inside of housing from the driver side compared to the passenger side. My question to you Bronco, is the insides of that brand seem identical on the insides or are they different as well.