i found this on a SVT cobra forum but it should work on our supercharged since it would be the same basic principal. it also come's with pictures!
"BOOST BYPASS" Installation Instructions for the 2003, 2004 Supercharged Mustang SVT Cobra
|
i found this on a SVT cobra forum but it should work on our supercharged since it would be the same basic principal. it also come's with pictures!
"BOOST BYPASS" Installation Instructions for the 2003, 2004 Supercharged Mustang SVT Cobra
its used for TCS.
When it engages it tries to pull boost because it also randomly cuts fuel and spark.
So lots of air, not much fuel, tcs, boom.
I've never run one. Trac off permanently.
Won't affect fuel economy in the slightest.
Forcing the valve shut all the time would affect fuel economy though.
our bost actuator doesn't have boots i don't think the line switch would work
Top swaps don't run it. I don't run one. I also have a hpt so it was easier to just delete the code "turbo wasgste solenoid" Much better.
Plus you see how 1/4 times are longer than 10sec? Well look at your boost timer....Might want to disable the timer too so the PCM doesnt interfere and cut boost. When I checked a tune recently it was set for 10 seconds
Best bet it to just disable the solenoid and leave one vacuum line on the bbv
Last edited by CrazyGuy03; 09-24-2011 at 12:24 PM.
You would simply remove the solenoid, chuck it, and the lines on it.
The BBV actuator would now have the bottom nipple open to atmosphere and the FPR line i believe would now need to end at the FPR instead of continuing to the BBV solenoid.
Again, traction control will be inoperable without this device functioning properly.
Yea traction control never works anyway because the wheel bearing lines always snap LOL. I did the method ZZP showed and mine definitely moved a good distance and it feels like my boost kicks in a lot fast when i stomp it than it did before. Drop in fuel economy is equal to when you drop thermostat temperatures.
Wheel bearing lines?
« Previous Thread | Next Thread » |
Tags for this Thread |