what did you guys do with the computer in the intake box? I dont see any way of holding it still
Printable View
what did you guys do with the computer in the intake box? I dont see any way of holding it still
just leave it there, its weather proof and shock proof.
use some big zip ties if ya want to hold it down better.
i was just worried it would slide over to where the fans are or wires ripping but ill just zip tie her down thanks
i just COMPLETELY finished my intake...ive had several different designs on it...but this one is final lol, its nowhere close to hitting anything now, and it runs smooth...i used 4 inch pvc though...and left it white hehe
Quote:
Originally Posted by coreygnar
I used a 3" coupler from siliconeintakes.com and I don't have any issues with the cone sagging or falling off. I did this a while ago, can't remember. Funny how I stumbled across the same cone as the author :)
I have an 04+. The coupler is short enough that it becomes very rigid once it's forced on between the MAF and TB. I used the Spectre adapter ring deal on the actual MAF. For the sensor I just drilled a smaller hole than the sensor itself and let the silicone fold around it once it was shoved in. No leaks. Anyways, very sturdy and no issues on my part. Hope that helps other 04+
Here's an image of my first iteration while I was waiting for the mail to bring the coupler...it had the saggy/falling off issue after just a week :(
http://i188.photobucket.com/albums/z...1-15153653.jpg
Hello my friends, just did litle mod of my own today, very proud and happy :D. Got everything needed for setup in the Menards store that is better home depot. Filter i have bought here: link to ebay. I Found it on forum somebody recomended and i fount its amazing deal. For 35 buks i got 2 awesome filters and 4 stikers :). I saved one for other car or as replacement. So all calculated my mod came to be $27.89 with filter!
Looks something like that:
http://www.mediafire.com/imgbnc.php/...82dfbe4a2g.jpg
How did you use the stock MAF "holder" ???
now if you failed at a step, whats the worse possible thing that could happen? and how could you tell which step you failed at?
Ummm...wut.
You can't really FAIL at making an intake..
You have a tube and a filter at the end of it..
What did you not do correctly?
you fail when it doesnt filter air.
Maybe he just bolted a piece of wood to the throttle body and it doesnt start.
Awesome thanks for the write up nawarkk just finished and love the results I used a K&N Filter
http://i110.photobucket.com/albums/n...g?t=1310602596
needs a blower.
Where's the clamp for the filter?
Lol that was before I put it on had to run up to autzone I didn't have any clamps that big
is this a sturdy setup.does it move easily ?do you suggest making a bracket to hold it?
Use your man arms and make it tight with hose clamps.Quote:
Originally Posted by jpmiller
That sh1t doesn't go anywhere.
so whats the solution to the filers falling off
Look at the post above you.
fool.