Re: Simple Intake (pictures)
Yeah its an 05. And i found a way to make it work just had to make a hole (for the PCV tube instead of the IAT sensor) It appears we have made it work will update once i get it hooked up just need to get some couplers and I will be fine. BTW we are using some metal piping that we found laying around work that was already fabbed to the shape we needed (imagine that) :) it will be painted with high temp paint and primer to be metallic blue :) hopefully that will get done this weekend
Re: Simple Intake (pictures)
Nice dude, get us pics so the 04+ guys can know what to do with the sensor. Good luck!
Re: Simple Intake (pictures)
Will take some this weekend as I work. When i get everything spread out and as it goes in. The piping is already cut with the hole for the sensor. Its going to be interesting but when isnt it?
Re: Simple Intake (pictures)
Is there a "special" way to get the IAT off of the original air intake, I dont feel like cutting it out.
Re: Simple Intake (pictures)
Re: Simple Intake (pictures)
It doesn't pull out. What I would do is just put a nice simple slit with a knife from the outer edge, to the inner edge and try and wiggle it out. That way the stock pipping is not completely destroyed.
Re: Simple Intake (pictures)
Re: Simple Intake (pictures)
Re: Simple Intake (pictures)
oh.. I couldn't pull mine out, it was surrounded by the rubber from the intake lol
So I guess try pulling it out first then if that doesn't work do what I said.
Re: Simple Intake (pictures)
Quote:
Originally Posted by
nawarkk
oh.. I couldn't pull mine out, it was surrounded by the rubber from the intake lol
So I guess try pulling it out first then if that doesn't work do what I said.
Trust me,, I tried pulling it right out, wasn't going anywhere...
I'll try making a little slit in it. much appreciated
Re: Simple Intake (pictures)
Done and Done...
Nice up-grade from my old intake.
Re: Simple Intake (pictures)
Quote:
Originally Posted by
Poil336
the very small, compressed, extremely restrictive part of the exhaust between the cat and the resonator.
nawarkk, thanks for the write up and clearing things up for us noobs :th_thumbsup-wink:
thanks man
Re: Simple Intake (pictures)
Quote:
Originally Posted by
Colossus
Done and Done...
Nice up-grade from my old intake.
Hook it up with a picture yo
Re: Simple Intake (pictures)
Re: Simple Intake (pictures)
Clean your filter^^^^ it looks a lil rough.
Re: Simple Intake (pictures)
Quote:
Originally Posted by
shawngtp
Clean your filter^^^^ it looks a lil rough.
haha I HAVE cleaned it...the results of a past life of a FWI, :th_laugh-lol3:
Re: Simple Intake (pictures)
this work as good and effective as a k&n or something would? is there much of a hp gain?
Re: Simple Intake (pictures)
this work on an 01 gp gt? and is it that much better then the stock intake?
Re: Simple Intake (pictures)
Does the stock airbox just come right out? Do you have to keep any of it in there?
Re: Simple Intake (pictures)
i'm not sure which year you've got, but if it's an 04+, it should just pop right up & out, but you'll need to open up the airbox & remove the pcm on the bottom before pulling the airbox out. i removed mine without disconnecting anything, put some rubber underneath & zip tied it down where the airbox used to sit. hope i don't have any problems with that...
anyway, my baby sounds a lot louder & feels better, but sometimes i hear some clicking or rattling from the engine while stepping on it... the filter isn't in contact with anything because i suspended it with a zip tie... any ideas what the noise could be?