I Think you have to have a crankcase variation relearn after replacing the crank position censor. I'm not totally sure hopefully someone else can help out.
|
|
04-15-2015
I Think you have to have a crankcase variation relearn after replacing the crank position censor. I'm not totally sure hopefully someone else can help out.
04-15-2015
no light is on, and i wondered about the relearn issue but everything ive found so far said it should still run i unplugged the maf but gotta let my battery charge its been getting cranked on for a cple days while troubleshooting
04-15-2015
Originally Posted by chris99gtp
that usually sets the cel and tells you it needs a crank learn.
| « Previous Thread | Next Thread » |
| Bookmarks |
Bookmarks |
