Thread: how to install after market head unit- steering wheel controls,

i have the pac- rps- gm11, wire harness for the steering wheel controls ect... i had everything hooked up, radio working, and so on, when i would hit the steering wheel control, the volume or any other one, it doesnt work, but the blue box from the wire hardneess LED light would light up as if it was getting the signal from hitting the steering wheel control, but they wont work.... anyone know what i should do or y its doing this, i tried programing it, didnt work, its like its getting the signal but not making it work, could the wire harness be bad?

So lost

i have a jvc-kw-v-20bt

....

its has av-in, av-out, & mic, will this work? i tried pluggin that thing into all 3 of those, n it didnt work, wen i would press like volume on steering wheel control, the box led light would light up, but volume wouldnt work,,,, did u have to program urs?

the only wires i do not have together from the RP5 apaproter to the stero are the solid blue(power antena) & the oragne and white

did u have to program urs??? or did it just work? also i am getting signal wen i press controls on steering wheel on the adaptor so i know its working like wen i hit the volume button, i can see the adaprot led light light up so i know its getting the signal from the sterring wheel button

i have everything plugged in too, the radio works,chimes work, and everything, just not the steering wheel controls......

what wires do u NOT have connected together?

the blue/yelllow has been connected...

also i dont have a blue/yellow wire... i have a solid blue, and a solid yellow, but no blue/yellow as one wire...

Got it

i think i just had somin plugged in that i didnt need to have plugged in... so now im going to attepmt the back up camera

yea all good man thanks a lot!!!