Thread: Dog Bone bushings

Are Poly bushing worth the upgrade?

Yes.

I hear the vibration felt through the steering wheel is really annoying and some don't recommend them for a daily driver.

Poly squares, stock for the Dogbones, and stock good condition motor mounts.. Done

Originally Posted by HighOctaneRacing

I have them and I like them but I will admit some times during stop and go traffic they get annoying but there is a fix, TURN UP THE RADIO lol

In what locations do you have the poly's?

Sent from my SGH-M919 using Tapatalk

Just do like REDCOMPG said, poly squares, stock for the dog bones and stock motor mounts

I'll give it a try, will probably order ZOO'S poly squares.

Sent from my SGH-M919 using Tapatalk

Originally Posted by kissmyss

I'll give it a try, will probably order ZOO'S poly squares.

Sent from my SGH-M919 using Tapatalk

If you mean ZZP... No


Get intenses one piece instead much better.. I had ZZP before and always got a annoying as clunk anytime the car shifted gears... Bought intenses... Issue disappered

Spell check, lol. Ok, thanks for the advice.

Sent from my SGH-M919 using Tapatalk

I've had the Intense ones since 09" no cracking or splitting.

I just put poly dogbones in and I like them. There's only a slight difference in performance if you ask me. There is vibration but it's not bad. At least doesn't bother me one bit.

Mine only viberates when it's cold and idling and it's barely even noticeable worth the money imo I have both circles and squares

Shiiiiiiiit..I've got round and square poly dogbones, poly engine mount, poly trans mount, poly sway bar bushings, and poly LCA bushings... ask me how my vibration is lol.......... don't even notice it any more lol that just power you feel hahaha

Gonna just put the squares in for now and see how that goes. I like a smooth quite car unless I'm getting on it, got a truck to drive when I want loud and rough.

Sent from my SGH-M919 using Tapatalk

I installed the bushings, there's a slight vibration until the car warms up. Once warm, the vibration is gone while idling in park or in gear. The engine used to move a little even with the stock bushing flipped and now there's no movement at all. One of the stock bushings was in decent condition, the other was damaged. Here's some pics;

Originally Posted by REDCOMPG

If you mean ZZP... No


Get intenses one piece instead much better.. I had ZZP before and always got a annoying as clunk anytime the car shifted gears... Bought intenses... Issue disappered

Thanks for the advice

Finished up a few other things, will be taking a nice drive to test things out.

Drove around all day today and didn't notice any vibration.