|
|
12-01-2011
Did you take the wipers off to put that drain tray in? If so, I don't think it was necessary and you may have given that tab a little touch when doing so... Since it's not catching the tab when you have the arms on.. maybe it's just a little out of whack and needs a little bend
12-01-2011
Sure did take em off but I have the 1 peace insted of the 2 peace so I had to take the wiper arms off so I could trim the plastic that has to go by by. Plus I had to bring it inside to warm up so it would not shatter into a million peaces since it is like 14 years old and like 20 degrees outside. But I can cycle the wipers as many times as I want and every time they lock in the down position. As soon as the wipers get close up they go and stay up.
12-01-2011
Ahhh...then I suspect the tab. If not..it's the motor/module on the bottom of the motor assembly.
12-01-2011
Even had my dad helping me and he cant figure it out lol. If I only put the pass side wiper on it works for about 5 trys then it messes up. If I put them both on nada. If both are off it works just fine. Friggin stupid. Wish I didnt have to use them in the morning to clear the frost. This is going to suck with a capital S The wife dont have to worry she gets off at 11 tonight so no frost on the window for her but when I take it to work I work till 7:30am so plenty o frost for me. Anyone want to blow up a 97 gp ???? Half tempted to rig up some moltolv cocktails for it.
12-02-2011
Well The wife took the car to work and of course it was snowing when I picked the car up to go to work. But all the sudden the wipers work just fine no problems now makes me sooo mad!!!!! mod you can close dont need help ne more
12-01-2011
My passenger side wiper would freeze up in the up position, turned out the little nut that attaches the wiper arm to the arm on the motor was slightly loose.
Goodluck.
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
