|
|
08-07-2011
I reciantly changed the valve covers on my 2004 gtp comp g and I started it and the elbows broke in my water pump and coolant went every were now it's squeealing like crazy I put belt dressing on my belts it stopes for a sec then 45 mins later or 20 it started again can u guys help me
08-08-2011
Yes, clean all the pulleys off w/ brake clean after removing the belt to allow you to turn them to be sure you got all the grooves clean and replace the belt. The belt is probably saturated w/ coolant now and will most likely never stop squealing.
You can try washing the belt off but not sure how well that will work.
08-09-2011
Thanks any one know of a cheap place to re manufacture my H.U.D
08-09-2011
Belts are cheap you can replace them if you want, but I had this happen with my alternator so I replaced it with a used one for $50 off ebay. So if could be one of the pulleys, if you can listen and get a general idea of the area its coming from then you can usually replace the culprit...its probably a Tensioner pulley
You can get a used HUD usually off Ebay from Ed Morad
08-10-2011
On the HUD. there is a typical spring or clip that breaks and makes it shine off in left field. I believe we have a post of how to fix your year hud here. Give it a search. If you don't find it.. please post again and I'll get you a write up.
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
