Thread: Front wheel squeeks when wheel is straight.

I drive about 10 miles a week. Sh** the car only has 64,xxx miles as is I bought it with 62,xxx miles 4 maybe 5 months ago. I dont think I even give the abs light a chance. Well thanks for the input guys. Is this a hard job or just a blah type of thing. Yes I will search when its not 5 sumthing in the morning lol

easy job. normally its always gunna be to the opposite side you turn, IF the sound go's away when going to the right its the left side and when turning to the left its the right side.

Should be 5 lugs nuts, take the brake caliper off and rotor, then remove the 36mm axle nut, then the 3 bolts hold the hub/wheel bearing in. Its pretty simple. I'm syure there is a write up on the step by step prodcedure.

Originally Posted by Fivefingerdeathpunch

easy job. normally its always gunna be to the opposite side you turn, IF the sound go's away when going to the right its the left side and when turning to the left its the right side.

Should be 5 lugs nuts, take the brake caliper off and rotor, then remove the 36mm axle nut, then the 3 bolts hold the hub/wheel bearing in. Its pretty simple. I'm syure there is a write up on the step by step prodcedure.

remember to crack the 36 mm axle nut loose before you remove the rim or jack it up, unless you have a good air gun.

squeaky wheel gets the grease, isn't here a phrase like that?

Originally Posted by Fivefingerdeathpunch

easy job. normally its always gunna be to the opposite side you turn, IF the sound go's away when going to the right its the left side and when turning to the left its the right side.

Should be 5 lugs nuts, take the brake caliper off and rotor, then remove the 36mm axle nut, then the 3 bolts hold the hub/wheel bearing in. Its pretty simple. I'm syure there is a write up on the step by step prodcedure.

Thats what I figured by just looking at the bearing/hub. Thanks still car never looks good squeekin