My 99 gtp will not run only for about three minutes with te sensor plugged I'n until you unplgue it , it will run fair but when u give it gas there is a bog and knocking when it builds boost , PLEASE!!! help
|
|
04-06-2011
My 99 gtp will not run only for about three minutes with te sensor plugged I'n until you unplgue it , it will run fair but when u give it gas there is a bog and knocking when it builds boost , PLEASE!!! help
04-06-2011
Sounds like you need a new MAF. With it unplugged it is running off of preset tables and will not run its best, but will run. Don't drive it with the MAF disconnected unless you desparately have to. If you do, then it may be a good idea to remove the SC belt. I'm not an S/C guru but I swear I've read that here before.
04-06-2011
You can drive on the tables, but don't go beating it. Drive as though you have part of it's leg cut off... nicey nice...
I agree, you seem to need a maf sensor.
04-06-2011
It's a brand new one I have put two I'n the last three days I don't know whT else to really do
04-09-2011
iac sensor maybe?
04-09-2011
Check the voltage of the reference wire and make sure it is 5 volts. If it's much higher, you may be frying the new sensors. Possible electrical short somewhere?
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
