AC fan works fine. Temp gauge seems to work fine. Both AC and rad fan relays are OK (switched to test). Tested rad fax with 12 V - works fine.
But the rad fan never comes on. On hot days in traffic the temp will go over 210. When it gets near 210 now, I use the AC and the AC fan brings the temp right down.
But I'd like to get the rad fan working properly. My Gates manual is useless for this diagnostic problem.
Looking at the schematics, it seems that the temp switch runs to the main computer. Does the computer control the fan or does the thermoswitch do it directly?
Anyone got any ideas? This is really getting to be a pain to figure out.
Thanks...Steve.