tlukwin 
Not the bulb or socket, as it lights up fine when the hazards are on. As far as I can tell, the front signal light and indicator are on one cct, and the rear is on another. Just need to know the wire colors so I can confirm where the open is.
|
|
08-12-2010
Not the bulb or socket, as it lights up fine when the hazards are on. As far as I can tell, the front signal light and indicator are on one cct, and the rear is on another. Just need to know the wire colors so I can confirm where the open is.
08-12-2010
Look up the wiring diagram. See if this model has separate wires to each corner. If it does. Check to see if that wire is getting power. If not, a new multifunction switch is in your future
If it is providing power. You have a bad spot in your wiring. Which is a pain to find.
08-12-2010
Thanks all, fixed it by splicing the front and rear wires together. You were right, it was a bit of a pain finding the right wires, but the result was worth it.
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
