Thread: k i got a cylinder 4 miss and im running out of options

Page 1 of 2 12 LastLast
Results 1 to 20 of 36
  1. #1 k i got a cylinder 4 miss and im running out of options 
    Its not that small is it? DaytonaGTP's Avatar
    Join Date
    Nov 2009
    Location
    Michigantown, IN
    Posts
    603
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    ive got a putt putt sound out the exhaust and a little shake of the engine. found out its a cylinder 4 miss. replaced all plugs with double plat autolites and new wires. checked my coils and ign. control module they all test fine. its got a 6 month old crank sensor that was replaced by me and my friend at midas. k so ive narrowed it down to either an injector or maybe bad compression. i havent done a noid test on the injector but i did use a stethiscope and it is pulsing steady just like the other five. thats about all i have... what else can i do here? im also thinking a vac leak but... its a 2000 gtp

    2000 Daytona GTP(aka the slow fwd GTO)
    Reply With Quote  
     

  2. #2 Re: k i got a cylinder 4 miss and im running out of options 
    donated to get this wow TorqueAutoMotiv's Avatar
    Join Date
    Apr 2009
    Location
    stockton ca
    Posts
    5,292
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    do a comprssion test and see where all cylinders are at

    98 gtp sedan forest green ,S1X intense cam,Intense pcm,Magnaflow exhaust, ubend delete,TEP trans 3.29's,3.4 smoothflow mps,Dyno'd 281hp and 371ft #'s of trq at the wheels
    http://www.cardomain.com/ride/3338681
    Reply With Quote  
     

  3. #3 Re: k i got a cylinder 4 miss and im running out of options 
    GTP Level Member 01gpgt01's Avatar
    Join Date
    Apr 2010
    Location
    Hagerstown,Md
    Posts
    1,933
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    swap the injector and see if the miss follows
    2001 GT. A few here and there mods http://www.streetfire.net/video/2001...ynp_208097.htm

    2009 Hummer H3 Solar flare premium
    Reply With Quote  
     

  4. #4 Re: k i got a cylinder 4 miss and im running out of options 
    The mod from over yonder TheOtherNick's Avatar
    Join Date
    Sep 2008
    Location
    Charles City, IA
    Posts
    9,955
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Also swap the coils around, just because they test good does not mean they are good.
    01 gtp-big cam e85 dd 78dodge- guzzling fuel 05 cummins- rollin coal
    SMGPFC Two Nipple General
    Reply With Quote  
     

  5. #5 Re: k i got a cylinder 4 miss and im running out of options 
    Its not that small is it? DaytonaGTP's Avatar
    Join Date
    Nov 2009
    Location
    Michigantown, IN
    Posts
    603
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    awesome. ill do all that. as for the injectors... will i have to get new o rings when i pull em out or can i just remove and pop back in?... im worried i might ruin the o rings while takin em out.

    2000 Daytona GTP(aka the slow fwd GTO)
    Reply With Quote  
     

  6. #6 Re: k i got a cylinder 4 miss and im running out of options 
    Awaiting Confirmation
    Join Date
    Jul 2009
    Location
    aowdnawi
    Posts
    23,292
    Thanks (Received)
    0
    Likes (Received)
    1
    Dislikes (Received)
    0
    depends how old they are.
    Reply With Quote  
     

  7. #7 Re: k i got a cylinder 4 miss and im running out of options 
    The mod from over yonder TheOtherNick's Avatar
    Join Date
    Sep 2008
    Location
    Charles City, IA
    Posts
    9,955
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Autozone has injector 0-rings in the help section if you tear some.
    01 gtp-big cam e85 dd 78dodge- guzzling fuel 05 cummins- rollin coal
    SMGPFC Two Nipple General
    Reply With Quote  
     

  8. #8 Re: k i got a cylinder 4 miss and im running out of options 
    Its not that small is it? DaytonaGTP's Avatar
    Join Date
    Nov 2009
    Location
    Michigantown, IN
    Posts
    603
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    k heres whats weird. during this whole thing my ses light never came on and even more odd was the fact that my scanner at work didnt read any codes, however, the one at autozone did. theirs does look way newer and it also reads abs lights... and of course the scanner at midas found the code for the cyl. 4 miss. well i went and switched the coils and then on the way home boom... my ses light came on...lol. so tommorow ill find out what it says. this time it should read a cyl. 2 miss since thats the coil i traded. if it does then ive got a winner...

    2000 Daytona GTP(aka the slow fwd GTO)
    Reply With Quote  
     

  9. #9 Re: k i got a cylinder 4 miss and im running out of options 
    SE Level Member
    Join Date
    Jul 2010
    Location
    bettendorf ia
    Posts
    91
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    if you know some one with a good scanner. you can shut the injector off on the cyl and see if it changes the way it runs.
    Reply With Quote  
     

  10. #10 Re: k i got a cylinder 4 miss and im running out of options 
    Awaiting Confirmation
    Join Date
    Jul 2009
    Location
    aowdnawi
    Posts
    23,292
    Thanks (Received)
    0
    Likes (Received)
    1
    Dislikes (Received)
    0
    if you wanted to do that you could simply unplug them...
    Reply With Quote  
     

  11. #11 Re: k i got a cylinder 4 miss and im running out of options 
    Its not that small is it? DaytonaGTP's Avatar
    Join Date
    Nov 2009
    Location
    Michigantown, IN
    Posts
    603
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    yeah but if i can hear the injector pulsing cant i assume that its fine. its quite possible its in my head maybe i do have a small exhaust leak at the rear manifold apparently. heres what happened with the scanner my friend has which is like a 2k dollar scanner. at idle im reading a good deal of misfire at cyl 4. when i raise the rpm to about 3k the miss pretty much goes away and then i get very small random misses in a couple other cylinders but mainly at idle til 3k rpm its cylinder 4. the coils are fine. ign mod is fine. the only other option i have is a compression test and maybe a fuel pressure test.

    2000 Daytona GTP(aka the slow fwd GTO)
    Reply With Quote  
     

  12. #12 Re: k i got a cylinder 4 miss and im running out of options 
    SE Level Member
    Join Date
    Jul 2010
    Location
    bettendorf ia
    Posts
    91
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    i would check fuel pressure.
    Reply With Quote  
     

  13. #13 Re: k i got a cylinder 4 miss and im running out of options 
    GT Level Member SlowRR's Avatar
    Join Date
    Mar 2009
    Location
    Brookfield, IL
    Posts
    128
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Not to pull up a old thread but I'm having same issue with same cyl. What did it end up being? I replaced all coil packs plugs and wires. Injector checked out fine, I did have low fuel pressure but changed pump and regulator and still have misfire
    Reply With Quote  
     

  14. #14 Re: k i got a cylinder 4 miss and im running out of options 
    Awaiting Confirmation
    Join Date
    Jul 2009
    Location
    aowdnawi
    Posts
    23,292
    Thanks (Received)
    0
    Likes (Received)
    1
    Dislikes (Received)
    0
    hows your exhaust?
    Reply With Quote  
     

  15. #15 Re: k i got a cylinder 4 miss and im running out of options 
    GT Level Member SlowRR's Avatar
    Join Date
    Mar 2009
    Location
    Brookfield, IL
    Posts
    128
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Brand new 3inch catless downpipe, brand new resonator, and flowmasters. Less then 1000 miles on all of it. Got a zzp pcm to delete and change out codes for catless dp
    Reply With Quote  
     

  16. #16 Re: k i got a cylinder 4 miss and im running out of options 
    Awaiting Confirmation
    Join Date
    Jul 2009
    Location
    aowdnawi
    Posts
    23,292
    Thanks (Received)
    0
    Likes (Received)
    1
    Dislikes (Received)
    0
    sure the DP isn't leaking at the top?
    Reply With Quote  
     

  17. #17 Re: k i got a cylinder 4 miss and im running out of options 
    GT Level Member SlowRR's Avatar
    Join Date
    Mar 2009
    Location
    Brookfield, IL
    Posts
    128
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Downpipe is tight, I'm seeing the misfire on my aeroforce. Its only at idle any throttle at all its fine, real bad right at start up
    Reply With Quote  
     

  18. #18 Re: k i got a cylinder 4 miss and im running out of options 
    Awaiting Confirmation
    Join Date
    Jul 2009
    Location
    aowdnawi
    Posts
    23,292
    Thanks (Received)
    0
    Likes (Received)
    1
    Dislikes (Received)
    0
    And you've tried the standard set?

    Coils, plugs, wires, moving injectors, ICM, exhaust leaks?
    Reply With Quote  
     

  19. #19 Re: k i got a cylinder 4 miss and im running out of options 
    GT Level Member SlowRR's Avatar
    Join Date
    Mar 2009
    Location
    Brookfield, IL
    Posts
    128
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Only thing I haven't done is switch around injectors. All plugs wires and coil packs brand new
    Reply With Quote  
     

  20. #20 Re: k i got a cylinder 4 miss and im running out of options 
    DUI BABY Bio248's Avatar
    Join Date
    Jan 2008
    Location
    MILWAUKEE
    Posts
    31,340
    Thanks (Received)
    0
    Likes (Received)
    1
    Dislikes (Received)
    0
    these cars misfire at idle. if its not causing any problems and all the ignition goodies are fine then who cares. my car always misfired at idle.
    Reply With Quote  
     

Page 1 of 2 12 LastLast

Similar Threads

  1. From misfire at cylinder 3 to a open circuit on the fuel injecter at cylinder 5
    By bbfanatic23 in forum 3.8L V6 Supercharged (L67)(L32)
    Replies: 0
    Last Post: 05-01-2010, 07:49 PM
  2. Coding cylinder 3 missfire and cylinder 3 injector port open
    By MATHEWSMAN1969 in forum 3.8L V6 Supercharged (L67)(L32)
    Replies: 2
    Last Post: 04-20-2010, 04:27 PM
  3. MY GP running like a 4 cylinder car why?
    By chitownballer8908 in forum 3.8L V6 Naturally Aspirated (L36)(L26)
    Replies: 1
    Last Post: 10-14-2009, 07:04 PM
  4. I miss my LT1
    By Black18Ice in forum Off Topic Discussion
    Replies: 10
    Last Post: 10-01-2009, 11:07 PM
  5. I have a miss. :(
    By Doug_Guilds in forum General Tech Discussion
    Replies: 18
    Last Post: 09-09-2008, 07:19 PM
Tags for this Thread

View Tag Cloud

Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •