Can't get it out 90 degree pry bar 5 pound hammer I replaced it last month brand new and its got a small gash in the boot so going to swap it with a new one again....cardone. Refuses to come out though.
36" wrecker bar should do it with hammering...is something else going on? MY2001 gtp
Decided to tear the passenger side off too took 10 minutes, the drivers side is going on 6 hours starting to mark up the case pretty good though :-(
Last ditch effort I cut the inner boot off to put visegrips on the cup so I can pull it, still can't get it. I can feel it move about 1/4 of an inch in and out but can not get it to pass that
damn c-clip, what am I missing?
And now the side cover is leaking fluid, guess a 60 dollar axle just cost me a transmission...this is so fun.
