Thread: how much to expect....

Originally Posted by BoostJunki3

im fine with that man do you have all the tools/pullers and shyt im completely fine with doing all the work with your aid and you'd make some money off it

i have all the tools to do it as i have done it on my car more than once before i settled on a rocker setup. the hardest part is dropping the cradle ever so slightly so you can get the cam in.

It sure isn't bad if you have power tools.

Originally Posted by minichopper6hp

Depends. Im more then likely going to design a completely different core as phenolic is proving to be too hard to seal for the average person, i honestly dont see how they are having problems but that is beside the point. Im going to be switching to aluminum and the parts would be even cheaper the design i have in mind (about $50 in materials). Ill keep you posted but that deal would still stand.

Even better...keep me posted.

Originally Posted by minichopper6hp

Depends. Im more then likely going to design a completely different core as phenolic is proving to be too hard to seal for the average person, i honestly dont see how they are having problems but that is beside the point. Im going to be switching to aluminum and the parts would be even cheaper the design i have in mind (about $50 in materials). Ill keep you posted but that deal would still stand.

do one for the l32 too

Originally Posted by Bio248

i have all the tools to do it as i have done it on my car more than once before i settled on a rocker setup. the hardest part is dropping the cradle ever so slightly so you can get the cam in.

ok well ill be in touch if i ever pony up and commit lol