Re: how much to expect....
Quote:
Originally Posted by
BoostJunki3
im fine with that man do you have all the tools/pullers and shyt im completely fine with doing all the work with your aid and you'd make some money off it :)
i have all the tools to do it as i have done it on my car more than once before i settled on a rocker setup. the hardest part is dropping the cradle ever so slightly so you can get the cam in.
Re: how much to expect....
It sure isn't bad if you have power tools.
Re: how much to expect....
Quote:
Originally Posted by
minichopper6hp
Depends. Im more then likely going to design a completely different core as phenolic is proving to be too hard to seal for the average person, i honestly dont see how they are having problems but that is beside the point. Im going to be switching to aluminum and the parts would be even cheaper the design i have in mind (about $50 in materials). Ill keep you posted but that deal would still stand.
Even better...keep me posted.
Re: how much to expect....
Quote:
Originally Posted by
minichopper6hp
Depends. Im more then likely going to design a completely different core as phenolic is proving to be too hard to seal for the average person, i honestly dont see how they are having problems but that is beside the point. Im going to be switching to aluminum and the parts would be even cheaper the design i have in mind (about $50 in materials). Ill keep you posted but that deal would still stand.
do one for the l32 too :)
Re: how much to expect....
Quote:
Originally Posted by
Bio248
i have all the tools to do it as i have done it on my car more than once before i settled on a rocker setup. the hardest part is dropping the cradle ever so slightly so you can get the cam in.
ok well ill be in touch if i ever pony up and commit lol
