all issues fixed :)!!!

**BoostJunki3** · 10-02-2009

wow guys you'll never guess the culprit....my bottom coil pack was wrong....it must have been from my old grand am gt 3100 i have alot of coils laying around the garage because the 1 and 4 on the coil were opposite the one is supposed to be on the bottom and 4 on top and it was vise versa must have accidently grabbed the wrong coil during one of my engine bay painting projects

....so in other words....cylinders 1 and 4 were firing out of order....now that its corrected.....0.3 kr is all i see throughout pulls

and it pulls like it should

**minichopper6hp** · 10-02-2009

If it were still on the same coil, wouldnt have mattered seeing how its a waste spark system. You probably had corrosion or a loose plug wire.

**BoostJunki3** · 10-02-2009

coil tested bad at advance auto just got back i wanted to know for sure

under high load it didnt even fire at all...

**TheOtherNick** · 10-02-2009

Thats just what I was going to say

**minichopper6hp** · 10-02-2009

Well there is your problem. Knew it wasnt the wires. If you had a scope you could have figured that out already.

**Liquifire** · 10-02-2009

congrats...glad you finally got it figured out.

**BoostJunki3** · 10-02-2009

thanks for all the potential idea, help guys its appreciate it so glad it wasnt anything serious....and i hope my last drive/pulls werent a fluke lucky run