|
|
10-02-2009
I am looking into buying a new air intake kit for my 2000 GT and am wondering which is the best one to buy.
I have an old intake kit from SLP and the PCM just sits loosely in a compartment inside the intake box. It didn't seem that secure. Just wondering if there is a better intake kit out there or if there is somewhere else the PCM can be placed so it is more secure.
Any pictures would be of great help.
Thanks in advance for any help
10-02-2009
usually everyone just lets it lay there loose, or you can zip tie it down, or you can get a piece of rubber matting, or rubber feet and put that between the PCM and the car and then zip tie that down.
10-02-2009
i used zip ties...seems to work fine
10-02-2009
I used zip ties on top of a foam insulation piece.
10-02-2009
Old old pic, but still solid as a rock. I hate posting these old dirty pics everytime someone asks this question. Maybe I should just take some new ones. LOL! These are easy to make too.
10-03-2009
Thanks for posting the pic. Sorry to make you repost it. I tried searching for a related topic before i posted this one but i couldn't find exactly what i was looking for. Where exactly is this located under the hood and how are they made?
Thanks again!
10-03-2009
The PCM? Or that bracket? He made it...bent a piece of metal around it and drilled it into the frame. Done.
10-03-2009
Here's a pic to give you a better idea of where it is located at.
10-03-2009
wow thanks so much for that pic. i jerry rigged it wit zip ties and its rattling, definitely doing this tomorro.Originally Posted by Abrasive
Old old pic, but still solid as a rock. I hate posting these old dirty pics everytime someone asks this question. Maybe I should just take some new ones. LOL! These are easy to make too.
Last edited by salannelson; 10-03-2009 at 08:43 PM.
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
